The ScrapVeyor II™ represents the next generation in leak-proof, heavy-duty scrap conveying. Its reinforced frame, sealed troughs, and oversized bearings are designed for continuous duty and built to outlast competitors—often delivering twice the operational life under similar loads. PRAB’s USA engineering team and Poland-based EU facility collaborate to ensure that every unit meets the same rigorous standards, providing responsive regional support to manufacturers worldwide.
PRAB ScrapVeyor conveyors provide heavy-duty, leak-proof scrap handling specifically engineered for stamping scrap, slugs, trim, and chips. Built to retain 100% of cutting fluids during conveyance, these systems reduce shop-floor cleanup, enhance safety, and help extend coolant life while efficiently elevating and unloading metal scrap into bins or loaders. Their rugged construction and positive discharge capabilities make them ideal for high-volume stamping and fabrication environments where reliability and fluid containment are critical.
Thanks to this system’s efficient, advanced engineering, manufacturers report dramatic reductions in downtime—what used to take hours of cleanup now takes minutes.
By choosing this leak-proof conveyor, you’re investing in a rugged, reliable metal scrap-handling solution that improves safety (eliminating oily puddles and slipping hazards), boosts productivity, and extends coolant life. This is heavy-duty scrap, conveying an ergonomic, cleanup-free advantage.
Features:
Options:
Load-out options include manual, powered, or fully automated swivel chutes or a manual or automatic tipping chute. Load-out systems can be used with single, dual, or full-size trailer or railcar applications.
Image Right: Auto lube systems are designed to automatically supply a small quantity of clean grease or oil to bearings on a regular basis, improving bearing performance and eliminating the maintenance required for manual greasing.
Trough designs are available in flat or V-style (symmetrical and off-set) formations, with the following configuration options, to meet the needs of your metal stamping scrap handling systems application.
PRAB’s ScrapVeyor moves metal stamping scrap in its fully sealed trough, reducing housekeeping and maintenance.
Product Brochures
Product Brochure: ScrapVeyor II Conveyors
Case Studies
Case Study: Cashing in Your Chips
Case Study: Metalworking Company Finds Increased Asset Utilization by Focusing on Scrap Management
White Paper
White Paper: Avoiding Accidents, Injuries & Illnesses In Metalworking Operations
Other Downloadable Content
Conveyor Solutions
Die Cast Scrap Conveyor Systems
PRAB Builds Equipment for the Toughest Jobs in Manufacturing and Metalworking
Conveyor Performance White Paper
The Challenge Kalamazoo, Mich., February, 2015 – Featured in Modern Machine Shop Magazine. The more chips a company cuts, the better. But once the output reaches a certain volume, it may be time to look beyond traditional disposal methods toward more efficient systems. New chip processing equipment, linked with coolant filtration systems, can raise the value of […]
There isn’t an employer in existence that shouldn’t consider slips and falls to be a significant safety concern in its facilities. In an article about overlooked hazards and risk zones in the workplace, Facility Executive magazine cites some sobering numbers: Same-level slip and fall accidents are the leading cause of workplace injuries and totaled almost 200,000 in 2015, according to […]
Proven to Raise Productivity Up To 60%Documented Results Achieved by PRAB Customers Enhanced Productivity Downtime Before PRAB: 3-4 hours Downtime After PRAB: 2 minutes Safer Workplace “Our process of disposing metal scrap has become more ergonomic and safer.” – Jack Rovan, Martin-Baker Long Lasting Equipment: Conveyors Still Operating in the Field […]
A metal scrap conveyor is a system used in manufacturing to transport metal chips, turnings, swarf, and other waste for recycling or disposal. Common types include steel belt, oscillating, drag chain, magnetic, pneumatic, and specialty conveyors—each chosen based on scrap size, abrasiveness, coolant content, or temperature. These systems improve efficiency, safety, and the value of metal scrap while preventing downtime.
PRAB metal scrap conveyors are engineered for 30+ years of continuous operation—with documented installations exceeding 40 years. Systems handle up to 2,000 lb/hr of scrap and integrate seamlessly with metal chip processing and coolant recycling systems. Known for their low maintenance and durability, PRAB metal handling systems are trusted by automotive, aerospace, die-casting, CNC, and heavy manufacturing plants worldwide.
Resources:
Rule of thumb:
A magnetic conveyor and a magnetic separator both use magnets to handle ferrous material, but they perform opposite functions. A magnetic conveyor is a material handling device that transports solid ferrous chips and parts. A magnetic separator is a fluid filtration device that pulls ferrous fines out of coolant. One moves metal. The other cleans fluid.
| Magnetic Conveyor | Magnetic Separator | |
| Primary job | Transports solid ferrous scrap | Removes ferrous fines from fluid |
| Acts on | Chips, slugs, turnings, small parts | Coolant or cutting oil |
| Category | Material handling and conveying | Fluid filtration |
| Typical position | Machine side, feeding downstream processing | In the coolant loop, often as a pre-filter |
| Output | Scrap delivered to a bin or processor | Cleaner fluid returned to the process |
The difference is what they act on. A magnetic conveyor transports solid ferrous scrap such as chips, stamping slugs, turnings, and small parts from the machine to downstream equipment or a container. A magnetic separator removes suspended ferrous fines and sludge from a fluid stream so the coolant or oil runs cleaner. A conveyor is used for material handling. A separator is fluid filtration.
A magnetic conveyor moves ferrous material cleanly and without carryover. PRAB uses a beltless slide design, with permanent magnets on a chain beneath a stationary stainless steel slider bed that grip the material and carry it to the release point, including up inclines. It is the right tool when the goal is to reliably move fine or thin ferrous scrap to a wringer, centrifuge, briquetter, or bin. See the full magnetic conveyor product page for models and configurations.
A magnetic separator removes ferrous contaminants from liquid. PRAB separators use a rotating drum fitted with ferrite or rare-earth magnets. As contaminated coolant or cutting oil flows across the drum, ferrous particles are captured and carried out of the fluid stream, and the cleaned fluid continues on. It is commonly used in grinding, honing, and gear cutting, and often runs as a pre-filter ahead of other fluid filtration equipment. PRAB ferrite models remove up to 97 percent of ferrous particles larger than 40 microns, and rare-earth models capture down to 15 microns, per PRAB published specifications.
Choose based on the problem you are solving. If solid ferrous chips are piling up at the machine and need to be moved away cleanly, you need a magnetic conveyor. If your coolant is loaded with fine ferrous particles that hurt tool life and surface finish, you need a magnetic separator. Many operations end up using both because moving the scrap and cleaning the fluid are two separate goals.
Yes, and they often work as a pair. A magnetic conveyor handles the solid scrap leaving the machine, while a magnetic separator keeps the coolant clean in the same cell. Both feed the larger goal of recovering fluid and scrap value, which is where coolant recycling systems complete the loop.
No. A magnetic conveyor is a conveying and material handling device, not a filtration device. It can help the coolant drain off the scrap as it moves, which reduces fluid carried away with the chips, but it does not filter the fluid itself. Removing particles from the fluid is the job of a magnetic separator or other fluid filtration equipment.
Both use permanent magnets, but are configured differently. A PRAB magnetic conveyor uses ceramic magnets, with rare-earth available, mounted on a moving chain under a fixed slider bed to grip and carry solid scrap. A PRAB magnetic separator uses ferrite or rare-earth magnets inside a rotating drum to attract fine particles out of flowing fluid. The conveyor holds and transports. The separator attracts and extracts.
For non-ferrous or mixed scrap that a magnet cannot hold, a steel belt conveyor is the appropriate transport choice instead of a magnetic conveyor.
Start by separating the two questions: how do I move the scrap, and how do I keep the fluid clean. For the scrap side, use PRAB’s conveyor selection tool or browse the full conveyor lineup. For the fluid side, the surest path is to test your actual coolant. PRAB offers free fluid testing for separator sizing and free materials testing for conveyor selection, so the equipment is matched to your real material rather than a generic profile.
Not sure which one fits, or whether you need both? Contact an expert at PRAB, or explore magnetic conveyors and magnetic separators to compare them side by side.
(800) 968-7722
(800) 493-3462