Eliminate misting and plant air quality issues.
Ideal for air cooling of hot die castings. Eliminates misting and air quality issues associated with water quench conveyors. Run continuously or indexing.
The application of a casting cooler can help meet operational needs while eliminating misting and improving plant air quality. Extended lengths are available with single and/or multiple fan designs for this specific kind of scrap metal equipment. Coolers can run continuously or indexing.
Advantages of the PRAB Casting Coolers include:
Auto lube systems
Product Brochures
Product Brochure: Casting Cooler
Other Downloadable Content
Conveyor Solutions
Die Cast Scrap Conveyor Systems
PRAB Builds Equipment for the Toughest Jobs in Manufacturing and Metalworking
Proven to Raise Productivity Up To 60%Documented Results Achieved by PRAB Customers Enhanced Productivity Downtime Before PRAB: 3-4 hours Downtime After PRAB: 2 minutes Safer Workplace “Our process of disposing metal scrap has become more ergonomic and safer.” – Jack Rovan, Martin-Baker Long Lasting Equipment: Conveyors Still Operating in the Field […]
Proven To Raise Productivity Up To 60% Documented Results Achieved by PRAB Customers Decreased Downtime Downtime Before PRAB: 3-4 hoursDowntime After PRAB: 2 minutes Safer Workplace “Our process of disposing metal scrap has become more ergonomic and safer.” – Jack Rovan, Martin-Baker Long Lasting Equipment: Conveyors Still Operating in the Field After 57 Years PRAB Conveyors […]
Proven to Raise Productivity Up To 60% Documented Results Achieved by PRAB Customers Long Lasting Equipment: Conveyors Still Operating in the Field After 57 Years Scrap aluminum from die cast trim presses drop onto oscillating conveyors that feed onto dual under-floor centralized collection oscillators. Oscillating conveyor deposits scrap into a large 6” […]
A metal scrap conveyor is a system used in manufacturing to transport metal chips, turnings, swarf, and other waste for recycling or disposal. Common types include steel belt, oscillating, drag chain, magnetic, pneumatic, and specialty conveyors—each chosen based on scrap size, abrasiveness, coolant content, or temperature. These systems improve efficiency, safety, and the value of metal scrap while preventing downtime.
PRAB metal scrap conveyors are engineered for 30+ years of continuous operation—with documented installations exceeding 40 years. Systems handle up to 2,000 lb/hr of scrap and integrate seamlessly with metal chip processing and coolant recycling systems. Known for their low maintenance and durability, PRAB metal handling systems are trusted by automotive, aerospace, die-casting, CNC, and heavy manufacturing plants worldwide.
Resources:
Rule of thumb:
A magnetic conveyor and a magnetic separator both use magnets to handle ferrous material, but they perform opposite functions. A magnetic conveyor is a material handling device that transports solid ferrous chips and parts. A magnetic separator is a fluid filtration device that pulls ferrous fines out of coolant. One moves metal. The other cleans fluid.
| Magnetic Conveyor | Magnetic Separator | |
| Primary job | Transports solid ferrous scrap | Removes ferrous fines from fluid |
| Acts on | Chips, slugs, turnings, small parts | Coolant or cutting oil |
| Category | Material handling and conveying | Fluid filtration |
| Typical position | Machine side, feeding downstream processing | In the coolant loop, often as a pre-filter |
| Output | Scrap delivered to a bin or processor | Cleaner fluid returned to the process |
The difference is what they act on. A magnetic conveyor transports solid ferrous scrap such as chips, stamping slugs, turnings, and small parts from the machine to downstream equipment or a container. A magnetic separator removes suspended ferrous fines and sludge from a fluid stream so the coolant or oil runs cleaner. A conveyor is used for material handling. A separator is fluid filtration.
A magnetic conveyor moves ferrous material cleanly and without carryover. PRAB uses a beltless slide design, with permanent magnets on a chain beneath a stationary stainless steel slider bed that grip the material and carry it to the release point, including up inclines. It is the right tool when the goal is to reliably move fine or thin ferrous scrap to a wringer, centrifuge, briquetter, or bin. See the full magnetic conveyor product page for models and configurations.
A magnetic separator removes ferrous contaminants from liquid. PRAB separators use a rotating drum fitted with ferrite or rare-earth magnets. As contaminated coolant or cutting oil flows across the drum, ferrous particles are captured and carried out of the fluid stream, and the cleaned fluid continues on. It is commonly used in grinding, honing, and gear cutting, and often runs as a pre-filter ahead of other fluid filtration equipment. PRAB ferrite models remove up to 97 percent of ferrous particles larger than 40 microns, and rare-earth models capture down to 15 microns, per PRAB published specifications.
Choose based on the problem you are solving. If solid ferrous chips are piling up at the machine and need to be moved away cleanly, you need a magnetic conveyor. If your coolant is loaded with fine ferrous particles that hurt tool life and surface finish, you need a magnetic separator. Many operations end up using both because moving the scrap and cleaning the fluid are two separate goals.
Yes, and they often work as a pair. A magnetic conveyor handles the solid scrap leaving the machine, while a magnetic separator keeps the coolant clean in the same cell. Both feed the larger goal of recovering fluid and scrap value, which is where coolant recycling systems complete the loop.
No. A magnetic conveyor is a conveying and material handling device, not a filtration device. It can help the coolant drain off the scrap as it moves, which reduces fluid carried away with the chips, but it does not filter the fluid itself. Removing particles from the fluid is the job of a magnetic separator or other fluid filtration equipment.
Both use permanent magnets, but are configured differently. A PRAB magnetic conveyor uses ceramic magnets, with rare-earth available, mounted on a moving chain under a fixed slider bed to grip and carry solid scrap. A PRAB magnetic separator uses ferrite or rare-earth magnets inside a rotating drum to attract fine particles out of flowing fluid. The conveyor holds and transports. The separator attracts and extracts.
For non-ferrous or mixed scrap that a magnet cannot hold, a steel belt conveyor is the appropriate transport choice instead of a magnetic conveyor.
Start by separating the two questions: how do I move the scrap, and how do I keep the fluid clean. For the scrap side, use PRAB’s conveyor selection tool or browse the full conveyor lineup. For the fluid side, the surest path is to test your actual coolant. PRAB offers free fluid testing for separator sizing and free materials testing for conveyor selection, so the equipment is matched to your real material rather than a generic profile.
Not sure which one fits, or whether you need both? Contact an expert at PRAB, or explore magnetic conveyors and magnetic separators to compare them side by side.
(800) 968-7722
(800) 493-3462