Author Archives for Paul Montgomery
About Paul Montgomery
Paul Montgomery is the Marketing Leader at PRAB, Inc., where he directs digital marketing strategy, content development, and answer engine optimization across PRAB metal scrap conveyor, chip processing, coolant recycling, and industrial water and wastewater treatment product lines. He brings more than 20 years of B2B marketing leadership spanning industrial manufacturing, SaaS, and technology, with deep specialization in AI search visibility (AEO), SEO, paid media, marketing automation, and revenue attribution. He holds a B.S. in Corporate Telecommunications from Texas Tech University.
Connect on LinkedIn: https://www.linkedin.com/in/paulmontgomery1
11 months ago 11 months ago
Published by Paul Montgomery
The Space–Efficiency Dilemma in Modern Manufacturing Small– and mid-sized manufacturing facilities face a constant challenge: how to maximize production capacity without expanding their footprint. As CNC machining centers, lathes, and mills produce increasing volumes of metal chips, traditional chip handling methods—drums, bins, and forklifts—consume valuable floor space and labor hours. This is where PRAB’s Metal Chip Processing Systems come in. Manual chip [...]
11 months ago 11 months ago
Published by Paul Montgomery
How Long-Life, Low-Maintenance Equipment Improves Lifecycle Efficiency, Cuts Costs, Energy Use, and Carbon Emissions in Metalworking Lifecycle Efficiency Matters: When equipment lasts only 10 –12 years, or requires ongoing major component replacements, manufacturers pay repeatedly for the embedded energy and carbon required to: Fabricate a replacement unit Transport it Install it Remove and dispose of the old unit Those lifecycle [...]
11 months ago 11 months ago
Published by Paul Montgomery
Why Managing Wet Metal Chips Is a Challenge In high-volume machining operations, metal turnings and bushy chips quickly accumulate in hoppers and bins. These materials are not only bulky and difficult to handle, but also saturated with valuable coolant or cutting oil—up to 20% by weight. Hauling away wet chips means paying to dispose of reusable coolant, increasing transportation costs, [...]
11 months ago 11 months ago
Published by Paul Montgomery
High-Volume Metal Scrap Handling Conveyors for Stamping & Die Casting High-volume stamping and die-casting operations push conveyor systems harder than almost any other manufacturing environment. Ton after ton of hot, wet, abrasive scrap hits the line every hour—creating surge loads, belt wear, and maintenance cycles that can stop a press or furnace if the system isn’t engineered correctly. When scrap [...]
11 months ago 11 months ago
Published by Paul Montgomery
How to Choose the Right Metal Scrap Conveyor Selecting the right metal scrap conveyor isn’t just about moving chips from A to B—it’s about reliability, throughput, coolant carry-over, maintenance load, and long-term total cost of ownership. With modern machining, stamping, and foundry operations running at higher speeds and volumes than ever, the wrong conveyor can become a hidden bottleneck. That’s [...]
11 months ago 11 months ago
Published by Paul Montgomery
The Role of Pneumatic Conveyors in Metalworking Operations Metal chips and turnings are byproducts of nearly every machining, milling, and grinding process. Efficient removal of these chips is critical, not only to maintain productivity but also to prevent safety hazards, coolant contamination, and equipment damage. While many facilities rely on mechanical conveyors such as steel belt, drag, or screw-type conveyors, [...]
12 months ago 12 months ago
Published by Paul Montgomery
The Hidden Cost of Dirty Coolant In high-precision metalworking, coolant condition directly affects productivity and part quality. As tramp oils, fine metal particulates, and bacteria accumulate, coolant loses lubricity and thermal control, causing premature tool wear, poor surface finishes, and part rework. This is where Coolant Recycling Systems become essential. Many plants still manage coolant individually at each machine’s sump, [...]
12 months ago 12 months ago
Published by Paul Montgomery
How Pharma Producers Turn Wastewater into a Strategic Asset Pharmaceutical manufacturers are under growing pressure to reduce water use, cut waste volumes, and comply with increasingly stringent discharge standards. Leading companies are turning wastewater from a liability into a source of measurable cost savings, sustainability gains, and brand differentiation. This is where PRAB’s pharmaceutical wastewater treatment technology becomes an important [...]
12 months ago 12 months ago
Published by Paul Montgomery
Why Coolant Waste Costs More Than You Think Every CNC operation depends on cutting fluids to cool, lubricate, and flush chips away from tooling surfaces. Over time, these fluids become contaminated with tramp oils, metal fines, and bacteria—turning an essential asset into a costly waste stream. This is where PRAB’s Cutting Fluid Recovery systems optimize Coolant Recycling. Disposing of spent [...]
12 months ago 12 months ago
Published by Paul Montgomery
Why pH Control Systems Matter in Industrial Wastewater Every manufacturing process that uses water, whether for cooling, cleaning, plating, or machining, creates wastewater with fluctuating pH. Those fluctuations can result from spent coolant, tramp oils, cleaners, or metal-bearing fluids. When pH drifts outside the EPA- or POTW-required 6.0–9.0 range, facilities risk heavy surcharges, permit violations, or even forced shutdowns. That’s [...]
(800) 968-7722
(800) 493-3462